Psychosocial Hazards in the Northern Territory Building and Construction Industry: A Profile of Job Demands and Job Resources in a Jurisdiction and Industry with High Rates of Suicide.

The work environment for building workers in Australia's Northern Territory (NT) is characterised by concerningly high rates of distress and suicide at both a jurisdictional and an industry level. Work-related psychosocial hazards are known antecedents of work-related distress and suicide, and more research is required to understand how these hazards impact workers in this unique building context. This paper examines the unique work environment in the NT building industry by comparing psychosocial hazards in the NT with those in the broader Australian building and construction industry. When comparing 330 NT self-report survey responses about psychosocial hazards in the workplace to 773 broader Australian building industry responses, supervisor task conflict for NT workers was more concerning, at 10.9% higher than the broader Australian cohort. Within the NT sample, comparisons between fly-in and fly-out/drive-in and drive-out (FIFO/DIDO) workers and non-FIFO/DIDO workers were also performed to determine specific local psychosocial hazards. When comparing FIFO/DIDO workers' responses to their NT peers, role overload and supervisor task conflict were significantly higher, and co-worker and supervisor support were lower. In FIFO/DIDO environments, praise and recognition, procedural justice, and change consultation were at concerningly lower averages than the broader NT building and construction industry. These results suggest that the NT building and construction industry, and particularly FIFO/DIDO operations, require greater resourcing, investment, and focus on workplace mental health initiatives to improve the work environment and wellbeing of this workforce and mitigate hazards that can lead to distress and the high rates of occupational suicide found in this jurisdiction and industry.

Structural adaptation of vertebrate endonuclease G for 5-hydroxymethylcytosine recognition and function.

Modified DNA bases functionally distinguish the taxonomic forms of life-5-methylcytosine separates prokaryotes from eukaryotes and 5-hydroxymethylcytosine (5hmC) invertebrates from vertebrates. We demonstrate here that mouse endonuclease G (mEndoG) shows specificity for both 5hmC and Holliday junctions. The enzyme has higher affinity (>50-fold) for junctions over duplex DNAs. A 5hmC-modification shifts the position of the cut site and increases the rate of DNA cleavage in modified versus unmodified junctions. The crystal structure of mEndoG shows that a cysteine (Cys69) is positioned to recognize 5hmC through a thiol-hydroxyl hydrogen bond. Although this Cys is conserved from worms to mammals, a two amino acid deletion in the vertebrate relative to the invertebrate sequence unwinds an α-helix, placing the thiol of Cys69 into the mEndoG active site. Mutations of Cys69 with alanine or serine show 5hmC-specificity that mirrors the hydrogen bonding potential of the side chain (C-H < S-H < O-H). A second orthogonal DNA binding site identified in the mEndoG structure accommodates a second arm of a junction. Thus, the specificity of mEndoG for 5hmC and junctions derives from structural adaptations that distinguish the vertebrate from the invertebrate enzyme, thereby thereby supporting a role for 5hmC in recombination processes.

5-hydroxymethylcytosine Marks Mammalian Origins Acting as a Barrier to Replication.

In most mammalian cells, DNA replication occurs once, and only once between cell divisions. Replication initiation is a highly regulated process with redundant mechanisms that prevent errant initiation events. In lower eukaryotes, replication is initiated from a defined consensus sequence, whereas a consensus sequence delineating mammalian origin of replication has not been identified. Here we show that 5-hydroxymethylcytosine (5hmC) is present at mammalian replication origins. Our data support the hypothesis that 5hmC has a role in cell cycle regulation. We show that 5hmC level is inversely proportional to proliferation; indeed, 5hmC negatively influences cell division by increasing the time a cell resides in G1. Our data suggest that 5hmC recruits replication-licensing factors, then is removed prior to or during origin firing. Later we propose that TET2, the enzyme catalyzing 5mC to 5hmC conversion, acts as barrier to rereplication. In a broader context, our results significantly advance the understating of 5hmC involvement in cell proliferation and disease states.

Oxidized C5-methyl cytosine bases in DNA: 5-Hydroxymethylcytosine; 5-formylcytosine; and 5-carboxycytosine.

Recent reports suggest that the Tet enzyme family catalytically oxidize 5-methylcytosine in mammalian cells. The oxidation of 5-methylcytosine can result in three chemically distinct species - 5-hydroxymethylcytsine, 5-formylcytosine, and 5-carboxycytosine. While the base excision repair machinery processes 5-formylcytosine and 5-carboxycytosine rapidly, 5-hydroxymethylcytosine is stable under physiological conditions. As a stable modification 5-hydroxymethylcytosine has a broad range of functions, from stem cell pluriopotency to tumorigenesis. The subsequent oxidation products, 5-formylcytosine and 5-carboxycytosine, are suggested to be involved in an active DNA demethylation pathway. This review provides an overview of the biochemistry and biology of 5-methylcytosine oxidation products.

Effect of Hydroxymethylcytosine on the Structure and Stability of Holliday Junctions.

5-Hydroxymethylcytosine (5hmC) is an epigenetic marker that has recently been shown to promote homologous recombination (HR). In this study, we determine the effects of 5hmC on the structure, thermodynamics, and conformational dynamics of the Holliday junction (the four-stranded DNA intermediate associated with HR) in its native stacked-X form. The hydroxymethyl and the control methyl substituents are placed in the context of an amphimorphic GxCC trinucleotide core sequence (where xC is C, 5hmC, or the methylated 5mC), which is part of a sequence also recognized by endonuclease G to promote HR. The hydroxymethyl group of the 5hmC junction adopts two distinct rotational conformations, with an in-base-plane form being dominant over the competing out-of-plane rotamer that has typically been seen in duplex structures. The in-plane rotamer is seen to be stabilized by a more stable intramolecular hydrogen bond to the junction backbone. Stabilizing hydrogen bonds (H-bonds) formed by the hydroxyl substituent in 5hmC or from a bridging water in the 5mC structure provide approximately 1.5-2 kcal/mol per interaction of stability to the junction, which is mostly offset by entropy compensation, thereby leaving the overall stability of the G5hmCC and G5mCC constructs similar to that of the GCC core. Thus, both methyl and hydroxymethyl modifications are accommodated without disrupting the structure or stability of the Holliday junction. Both 5hmC and 5mC are shown to open the structure to make the junction core more accessible. The overall consequences of incorporating 5hmC into a DNA junction are thus discussed in the context of the specificity in protein recognition of the hydroxymethyl substituent through direct and indirect readout mechanisms.

Biochemical reconstitution of TET1-TDG-BER-dependent active DNA demethylation reveals a highly coordinated mechanism.

Cytosine methylation in CpG dinucleotides is an epigenetic DNA modification dynamically established and maintained by DNA methyltransferases and demethylases. Molecular mechanisms of active DNA demethylation began to surface only recently with the discovery of the 5-methylcytosine (5mC)-directed hydroxylase and base excision activities of ten-eleven translocation (TET) proteins and thymine DNA glycosylase (TDG). This implicated a pathway operating through oxidation of 5mC by TET proteins, which generates substrates for TDG-dependent base excision repair (BER) that then replaces 5mC with C. Yet, direct evidence for a productive coupling of TET with BER has never been presented. Here we show that TET1 and TDG physically interact to oxidize and excise 5mC, and proof by biochemical reconstitution that the TET-TDG-BER system is capable of productive DNA demethylation. We show that the mechanism assures a sequential demethylation of symmetrically methylated CpGs, thereby avoiding DNA double-strand break formation but contributing to the mutability of methylated CpGs.

Endonuclease G preferentially cleaves 5-hydroxymethylcytosine-modified DNA creating a substrate for recombination.

5-hydroxymethylcytosine (5hmC) has been suggested to be involved in various nucleic acid transactions and cellular processes, including transcriptional regulation, demethylation of 5-methylcytosine and stem cell pluripotency. We have identified an activity that preferentially catalyzes the cleavage of double-stranded 5hmC-modified DNA. Using biochemical methods we purified this activity from mouse liver extracts and demonstrate that the enzyme responsible for the cleavage of 5hmC-modified DNA is Endonuclease G (EndoG). We show that recombinant EndoG preferentially recognizes and cleaves a core sequence when one specific cytosine within that core sequence is hydroxymethylated. Additionally, we provide in vivo evidence that EndoG catalyzes the formation of double-stranded DNA breaks and that this cleavage is dependent upon the core sequence, EndoG and 5hmC. Finally, we demonstrate that the 5hmC modification can promote conservative recombination in an EndoG-dependent manner.

Deletion of mouse Alkbh7 leads to obesity.

Mammals have nine homologues of the Escherichia coli AlkB repair protein: Alkbh1-8, and the fat mass and obesity associated protein FTO. In this report, we describe the first functional characterization of mouse Alkbh7. We show that the Alkbh7 protein is located in the mitochondrial matrix and that an Alkbh7 deletion dramatically increases body weight and body fat. Our data indicate that Alkbh7, directly or indirectly, facilitates the utilization of short-chain fatty acids, which we propose is the likely cause for the obesity phenotype observed in the Alkbh7(-/-) mice. Collectively, our data provide the first direct demonstration that murine Alkbh7 is a mitochondrial resident protein involved in fatty acid metabolism and the development of obesity.

Reconstitution of the very short patch repair pathway from Escherichia coli.

The Escherichia coli very short patch (VSP) repair pathway corrects thymidine-guanine mismatches that result from spontaneous hydrolytic deamination damage of 5-methyl cytosine. The VSP repair pathway requires the Vsr endonuclease, DNA polymerase I, a DNA ligase, MutS, and MutL to function at peak efficiency. The biochemical roles of most of these proteins in the VSP repair pathway have been studied extensively. However, these proteins have not been studied together in the context of VSP repair in an in vitro system. Using purified components of the VSP repair system in a reconstitution reaction, we have begun to develop an understanding of the role played by each of these proteins in the VSP repair pathway and have gained insights into their interactions. In this report we demonstrate an in vitro reconstitution of the VSP repair pathway using a plasmid DNA substrate. Surprisingly, the repair track length can be modulated by the concentration of DNA ligase. We propose roles for MutL and MutS in coordination of this repair pathway.

Pull-down of 5-hydroxymethylcytosine DNA using JBP1-coated magnetic beads.

We describe a method for the efficient and selective identification of DNA containing the 5-hydroxymethylcytosine (5-hmC) modification. This protocol takes advantage of two proteins: T4 ß-glucosyltransferase (ß-gt), which converts 5-hmC to ß-glucosyl-5-hmC (ß-glu-5-hmC), and J-binding protein 1 (JBP1), which specifically recognizes and binds to ß-glu-5-hmC. We describe the steps necessary to purify JBP1 and modify this protein such that it can be fixed to magnetic beads. Thereafter, we detail how to use the JBP1 magnetic beads to obtain DNA that is enriched with 5-hmC. This method is likely to produce results similar to those of other 5-hmC pull-down assays; however, all necessary components for the completion of this protocol are readily available or can be easily and rapidly synthesized using basic molecular biology techniques. This protocol can be completed in less than 2 weeks and allows the user to isolate 5-hmC-containing genomic DNA that is suitable for analysis by quantitative PCR (qPCR), sequencing, microarray and other molecular biology assays.

The presence of 5-hydroxymethylcytosine at the gene promoter and not in the gene body negatively regulates gene expression.

5-Hydroxymethylcytosine (5hmC) was recently described as a stable modification in mammalian DNA. 5hmC is formed by the enzymatic oxidation of 5-methylcytosine (5meC). Overwhelming evidence supports the notion that 5meC has a negative effect on transcription; however, only recently has the effect that 5hmC has on transcription begun to be studied. Using model substrates including the CMV(IE) promoter and a generic gene body we have directly assessed the effect that 5hmC, both at the promoter and in the gene body, has on in vitro gene transcription. We show that the presence of the 5hmC modifications strongly represses transcription. We also demonstrate that the inhibition of transcriptional activity is primarily due to the presence of 5hmC in the promoter and that 5hmC in the gene body has a minimal effect on transcription. Thus, we propose that the presence of 5hmC in promoter prevents the binding of essential transcription factors or recruits factors that repress transcription.

A novel method for the efficient and selective identification of 5-hydroxymethylcytosine in genomic DNA.

Recently, 5-hydroxymethylcytosine (5hmC) was identified in mammalian genomic DNA. The biological role of this modification remains unclear; however, identifying the genomic location of this modified base will assist in elucidating its function. We describe a method for the rapid and inexpensive identification of genomic regions containing 5hmC. This method involves the selective glucosylation of 5hmC residues by the ß-glucosyltransferase from T4 bacteriophage creating ß-glucosyl-5-hydroxymethylcytosine (ß-glu-5hmC). The ß-glu-5hmC modification provides a target that can be efficiently and selectively pulled down by J-binding protein 1 coupled to magnetic beads. DNA that is precipitated is suitable for analysis by quantitative PCR, microarray or sequencing. Furthermore, we demonstrate that the J-binding protein 1 pull down assay identifies 5hmC at the promoters of developmentally regulated genes in human embryonic stem cells. The method described here will allow for a greater understanding of the temporal and spatial effects that 5hmC may have on epigenetic regulation at the single gene level.

The UvrD helicase and its modulation by the mismatch repair protein MutL.

UvrD is a superfamily I DNA helicase with well documented roles in excision repair and methyl-directed mismatch repair (MMR) in addition to poorly understood roles in replication and recombination. The MutL protein is a homodimeric DNA-stimulated ATPase that plays a central role in MMR in Escherichia coli. This protein has been characterized as the master regulator of mismatch repair since it interacts with and modulates the activity of several other proteins involved in the mismatch repair pathway including MutS, MutH and UvrD. Here we present a brief summary of recent studies directed toward arriving at a better understanding of the interaction between MutL and UvrD, and the impact of this interaction on the activity of UvrD and its role in mismatch repair.

MutL-catalyzed ATP hydrolysis is required at a post-UvrD loading step in methyl-directed mismatch repair.

Methyl-directed mismatch repair is a coordinated process that ensures replication fidelity and genome integrity by resolving base pair mismatches and insertion/deletion loops. This post-replicative event involves the activities of several proteins, many of which appear to be regulated by MutL. MutL interacts with and modulates the activities of MutS, MutH, UvrD, and perhaps other proteins. The purified protein catalyzes a slow ATP hydrolysis reaction that is essential for its role in mismatch repair. However, the role of the ATP hydrolysis reaction is not understood. We have begun to address this issue using two point mutants: MutL-E29A, which binds nucleotide but does not catalyze ATP hydrolysis, and MutL-D58A, which does not bind nucleotide. As expected, both mutants failed to complement the loss of MutL in genetic assays. Purified MutL-E29A protein interacted with MutS and stimulated the MutH-catalyzed nicking reaction in a mismatch-dependent manner. Importantly, MutL-E29A stimulated the loading of UvrD on model substrates. In fact, stimulation of UvrD-catalyzed unwinding was more robust with MutL-E29A than the wild-type protein. MutL-D58A, on the other hand, did not interact with MutS, stimulate MutH-catalyzed nicking, or stimulate the loading of UvrD. We conclude that ATP-bound MutL is required for the incision steps associated with mismatch repair and that ATP hydrolysis by MutL is required for a step in the mismatch repair pathway subsequent to the loading of UvrD and may serve to regulate helicase loading.

The DNA binding activity of MutL is required for methyl-directed mismatch repair in Escherichia coli.

The DNA binding properties of the mismatch repair protein MutL and their importance in the repair process have been controversial for nearly two decades. We have addressed this issue using a point mutant of MutL (MutL-R266E). The biochemical and genetic data suggest that DNA binding by MutL is required for dam methylation-directed mismatch repair. We demonstrate that purified MutL-R266E retains wild-type biochemical properties that do not depend on DNA binding, such as basal ATP hydrolysis in the absence of DNA and the ability to interact with other mismatch repair proteins. However, purified MutL-R266E binds DNA poorly in vitro as compared with MutL, and consistent with this observation, its DNA-dependent biochemical activities, like DNA-stimulated ATP hydrolysis and helicase II stimulation, are severely compromised. In addition, there is a modest effect on stimulation of MutH-catalyzed nicking. Finally, genetic assays show that MutL-R266E has a strong mutator phenotype, demonstrating that the mutant is unable to function in dam methylation-directed mismatch repair in vivo.